
--------------------------------------------------------------------
Various
--------------------------------------------------------------------
1  PC board coded ???, 121 x 78mm 
1  2.5mm PC-mount DC power connector
1  12VDC DPST PC-mount 240v/10a relay
2  PC-mount momentary push button switches
1  3-way PC-mount terminal block connector
1  8-way DIP switch
1  8MHz crystal (XTAL 1)
1  18-pin IC socket
5  6mm x M3 machine screws
1  M3 nut & washer (for securing regulator REG1)
4  10mm x M3 stand offs
1  set of sticker labels to suit project
1  12VDC @150mA plug pack 
1  short length of tinned copper wire (PCB links)
--------------------------------------------------------------------

--------------------------------------------------------------------
Semiconductors
--------------------------------------------------------------------
1  PIC16f628 micro with "MOT.hex, ver 3.0" (IC1)
1  LM7805 3-terminal regulator (REG1)
1  BC548 or similar NPN transistor (Q1)
1  red 10-LED bar graph display (LED1 - 10)
1  green 5mm LED (LED 11)
10 1N914 silicon signal diodes (D1 - 10)
4  1N4004 power diodes (D11 - 14)
--------------------------------------------------------------------

--------------------------------------------------------------------
Capacitors
--------------------------------------------------------------------
1  100uF 25VW RB electrolytic
1  10uF 16VW RB electrolytic
2  100nF MKT polyester
2  22pF ceramic disc
--------------------------------------------------------------------

--------------------------------------------------------------------
Resistors
--------------------------------------------------------------------
2  10K  (0.25W, 1%)
8  47K  (0.25W, 1%)
1  2K7  (0.25W, 1%)
1  27R  (0.25W, 1%)
1  15R  (0.25W, 1%)
10 680R (0.25W, 1%)
1  82R  (1Watt, 5%)
--------------------------------------------------------------------
--------------------------------------------------------------------